Confidential Code - Optus S2 User Manual

5 AUTOMATIC LOCK
AUTOMATIC LOCK
The Optus MobileSat S2 has a feature where Full Lock is set
everytime the phone powers up. This restricts the use of the
phone when powered up by unauthorised users.
With FCN 63 set On, the phone will always power up in Full
Lock. To unlock the phone press
FCN 6 X X X X 2

Confidential Code).

+
or - Resets the lock mode to Partial or Normal.
STO
Saves the setting and exits.
(The programmable keys
operation. See Page 56).
When the phone is powered off then on again, Full Lock mode
will be reinstated.
X X X X
(where is the
P1 P2
or may be useful for this
52
5 CONFIDENTIAL CODE
The Optus MobileSat S2 has a CONFIDENTIAL CODE that is
required for access to locked functions, or the locking functions
themselves.
The Confidential Code is a 4-digit code, and is recommended for
the exclusive use of the phone owner.
The code is required to either control the locks as explained on
Page 126, OR to access the functions beginning with the number
6 or 7.
• CONFIDENTIAL ACCESS CODE
Can be used to set FULL LOCK or PARTIAL LOCK.
Your 4 digit code is initially "0000", but may be altered using
Function 61 (e.g. could be set to the same four digit code as
your credit card).
This 4 digit code is used to allow access to many functions
shown later in this manual.
Note: The Confidential Code of the S2 unit is different to the PIN used to
access Voicemail.
If you forget what the Confidential Code has been set to, your
Authorised MobileSat Dealer will need to reset the code.
53