Fcn 22: Software Version/Esn; Fcn 23: Zone/Class/Priority - Optus S2 User Manual

6

FCN 22: SOFTWARE VERSION/ESN

FCN 2 2
Software Version/ESN
CLR
EXIT
This function allows you to immediately determine what software
version is loaded inside the S2 transceiver unit. Each unit is
uniquely identified by its Electronic Serial Number (ESN). The
ESN will be displayed as a decimal number with a maximum of
fourteen characters. This function provides a read-only display.
Supplementary pages provide:
• GPS configuration
• HPA software version
• Antenna software version and serial number.
Review Software Version and ESN
FCN 2 2
The software version
and the ESN number of the unit
+
will be displayed. / -
toggle through the supplementary
pages.
EXIT
CLR
Return to the previous screen.
Ver 37
to ESN : 0123
4567890123
98
6

FCN 23: ZONE/CLASS/PRIORITY

FCN 2 3
Zone/Class/Priority
CLR
EXIT
This function allows you to read the configuration parameters of
the Optus MobileSat S2 terminal. The read-only parameters are
Zone, Class, Priority and Quality.
These parameters affect the satellite power used to make the
call, and can be monitored by Optus at any time.
Read Configuration Parameters:
FCN
2 3
The display of the
parameters is in an abbreviated
format where:
Z – Zone (range 0-3)
C – Class (range 1-4)
P – Priority (range 0-3)
Q – Quality (range 0-3)
EXIT
CLR
Return to the previous screen.
FCN 23
SYS_CONFIG
Z2C1P3Q2
99