Repeat Dial - Optus S2 User Manual

4

REPEAT DIAL

PHONE NO
Enter phone number
FCN SND
Repeat Dial Mode and Start
END
If busy signal
CLR
To exit Repeat Dial Mode
With the Repeat Dial feature, the phone automatically redials a
busy or no-answer number, up to three times, at one minute
intervals. If the call is successful then the Repeat Dial is disabled
for that sequence.
This feature is dependant on the configuration of the Earth
Station. Check with the MobileSat Helpdesk to ensure that
Repeat Dial service is available. Repeat Dial will not operate in
Partial or Full Lock mode.
Repeat Dial
PHONE NO FCN
SND
will make a normal call, however if the
call fails due to cancellation or time out then the display will
show the phone number and ''RD'' for Repeat Dial.
The phone will redial the number after one minute.
Flashing
Note: If the phone number was the last number tried, you do not need to re-
enter the number.
RD
0392643050
Bill
44
4 REPEAT DIAL
If Busy Signal is Heard
END
to cancel, "RD" will be displayed.
To Discontinue the Repeat Dial Command
CLR
(Hold) to exit while waiting for the next attempt to begin.
45