Table of Contents
Advertisement
FCN 64: CALL CREDIT
6
CHANGE MASTER PIN
To change the Master Pin from the
handset, press the following button
sequence when starting from the
Standby screen:
FCN
CONF CODE
6
4
Then enter the new 4 digit Master Pin.
The numbers will be displayed as they
are entered. Press
.
STO
Note: that the old Master Pin will not be displayed
by this handset function screen
Re-enter the new Master Pin number.
The entry will not display the numbers,
but will show how many digits have
been entered with stars.
Press
to confirm the change to the
STO
new Master Pin.
During the Pin digit entry, short
presses of the CLR key will erase the
last digit.
A long press of the
key will cancel the function and
CLR
return to the 'Enter Pin' screen.
CallCredit
Change
MasterPin
+
+
STO
CallCredit
Change
****
CallCredit
Re-enter
MasterPin
Press STO
to save
134
FCN 64: CALL CREDIT
6
MODE CONTROL
To activate or disable the Call Credit
mode, press the following button
sequence when starting from the
Standby screen:
FCN
CONF CODE
6
4
+
Use the
or
-
or
*
to toggle the mode between Active and
Disabled.
When the
key is pressed, the
STO
displayed setting is saved. If the setting
is ACTIVE, the handset will immediately proceed to Call Credit
mode and display the "Enter Pin" screen.
MAKING A CALL: OPTUS MOBILESAT-S2 HANDSET
With the Call Credit system Disabled, the Optus MobileSat S2
shall operate in 'normal' mode.
The user may originate outgoing calls without restriction. The
PIN Number is not required to make calls.
CALL CREDIT SYSTEM – ACTIVE
With the 'Call Credit' system ACTIVE,
the Optus MobileSat S2 handset display
always prompts the user for the input
of a 4-digit user account PIN NUMBER,
followed by the
key.
STO
The PIN Number must correspond to a
valid user account Pin Number.
If the entered PIN is the MASTER PIN,
the handset shall then prompt for the
Optus MobileSat S2 'Lock Code'.
If correctly entered, the Optus MobileSat S2 will switch to
'Normal mode' and display 'Standby'.
While at the Standby screen, a long
handset to Call Credit Mode, provided the function is still
active.
CallCredit
On/Off
Setting
+
STO
/
#
buttons
CallCredit
On/Off
Active
1:45pm
Enter PIN
[
Enter Lock
Code
, will return the
CLR
135
]
Advertisement
Table of Contents
