P2: Programmable Function - Optus S2 User Manual

P2: PROGRAMMABLE FUNCTION 2

6
P2
Programmable Function 2
Select Sequence
Select Key Sequence
STO
SAVE Sequence as P2 and EXIT
CLR
EXIT without saving
This allows you to set a commonly used key sequence as a
'hot' key. When P2 is selected, the key sequence is called up
immediately. P2 can be programmed or recalled in Partial or
Full Lock modes.
Note that P2 operates differently for transceivers with CUG
capability.
To Program
P2
(Hold) When programming a P2 function, an indicator
will appear in the Standby screen.
Select Sequence
Any key sequence
may be entered and assigned to
the hot key
P2
All of the keys pressed while in
programming mode will be
performed when is recalled.
P2
If an incorrect key sequence is
entered, it is recommended to reset
When programming a lock function (FCN 6X or 7X) in the
sequence, recalling will prompt for the Confidential
P2
Code before stepping to the following programmed key
sequence.
A maximum of fifty keystrokes can be recorded.
P2 7:27pm
10
Standby
and start again.
P2
172
6
Reset
To remove the programmed key sequence from P2, just press
P2
hot key function (ie: enter no sequence). Resetting the
programmed key sequence is not protected by passwords.
Save the Programmed Function
P2
beep is heard when the programming mode ends.
Note: While in program mode, the
will not exit the program mode. The
P1 cannot be recalled while in P2 programming mode.
Run the Programmed Function
To run the P2 key sequence, start in the Standby screen and
press
Error Beep will sound. The programmed key sequence will be
recalled step by step, each step being displayed on the
screen.
While a P2 program is running, only the
key will abort the program.
CLR
P2
P2: PROGRAMMABLE FUNCTION 2
and hold, then press (momentarily) to erase the
P2
This saves the programmed function and EXIT. A double
CLR key is treated as any other key and
key cannot be saved in a program.
PWR
momentarily. If no program has been saved, an
P2
Return to previous screen.
173
(momentarily)
P2