PACKAGE CONTENTS The following items are included in your package. Phone Handset Quick-Start Guide Handset Cord Stand Wall-Mount Bracket (Optional Accessory Power Adapter SKU: T67WMB)
ASSEMBLING THE PHONE (CONTINUED) CONNECT CABLES The T67LTE Desk Phone should be used with a Yealink® NOTE: original power adaptor (12 V/1 A) only. The use of a third-party power adapter may cause the damage to the phone. CONNECT ANY USB DEVICES (OPTIONAL) The USB port can also be used to connect other USB NOTE: devices, such as the EXP50.
GETTING TO KNOW YOUR DEVICE STARTING THE PHONE Once the phone is powered on, it will automatically begin the initialization process and connect to the 4G network. The phone will go through a series of screens and update the firmware on the device; the first-time setup process takes about 15 minutes and should not be interrupted.
USING THE TOUCH SCREEN By default, the LTE Desk Phone supports three idle screens. The home screen displays as below: TO NAVIGATE THE TOUCH SCREEN: • Swipe left or right to switch among different idle screens. • Tap to go back to the previous screen. •...
STATUS ICONS Mute mode is enabled. MUTE MODE: The device is connected to a 4G LTE 4G LTE ACTIVE: wireless network. Cellular network signal strength. SIGNAL STRENGTH: No wireless network is available. NETWORK NOT AVAILABLE: (White) Wi-Fi is active. WI-FI ACTIVE: (Green) A Wi-Fi network is available.
CONTROL CENTER AND NOTIFICATION CENTER (CONTINUED) A. Displays the phone’s time and date. B. Control Center C. Notification Center D. Android Keys CONTROL CENTER • To turn on/off common functions quickly, capture a screenshot or go to the Settings screen, tap corresponding icons. •...
PLACING A CALL USING A HANDSET: 1. Pick up the handset. 2. Enter the number, and then tap SEND. USING THE SPEAKERPHONE: 1. With the handset on-hook, press 2. Enter the number, and then tap SEND. USING THE HEADSET: 1. With the headset connected, press to activate the headset mode.
ENDING A CALL USING THE HANDSET: Hang up the handset or tap • END CALL. USING THE SPEAKERPHONE: Press • END CALL. USING THE HEADSET: • END CALL. REDIALING A CALL • Press to enter the list, and then tap the desired entry. PLACED CALLS •...
TRANSFERRING A CALL You can transfer a call in the following ways: DIRECT TRANSFER 1. Tap the soft key during an active call. The call is placed TRANSFER on hold. 2. Enter the number you want to transfer to. 3. Press the soft key and select TRANSFER DIRECT...
Page 13
FORWARDING A CALL (CONTINUED) INITIATING A CONFERENCE CALL 1. Tap during an active call. The call is placed on hold. CONFERENCE 2. Enter the number of the second party, and then tap CONFERENCE. 3. Tap again when the second party answers. Three CONFERENCE parties are now joined in the conference.
CUSTOMIZING YOUR PHONE MANAGING CALL HISTORY 1. Tap 2. Drag up and down to scroll. 3. Tap after the desired entry, and then you can do the following: • Tap to call the entry. SEND • Tap to add the entry to the local directory. •...
ADJUSTING THE VOLUME Press to adjust the volume. SETTING RINGTONES 1. Tap > > > SETTINGS BASIC SETTINGS SOUND RING TONES 2. Select Common or the desired account. 3. Select the desired ringtone. 4. Tap to accept the change. REGULATORY NOTICES Operating ambient temperatures: •...
SAFETY INSTRUCTIONS Save these instructions. Read these safety instructions before use! The following basic safety precautions should always be followed to reduce the risk of fire, electrical shock and other personal injury. GENERAL REQUIREMENTS • Before you install and use the device, read the safety instructions carefully.
OPERATING REQUIREMENTS • Do not let a child operate the device without supervision. • Do not let a child play with the device or any accessory in case of accidental swallowing. • Please use only the accessories provided or authorized by the manufacturer.
CLEANING REQUIREMENTS • Before cleaning the device, stop using it and disconnect it from the power supply. • Use a piece of soft, dry antistatic cloth to clean the device. • Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other hazards.