Optus S2 User Manual page 87

FCN 91: ANTENNA ADJUST
6
planes. In normal operation, the marine antenna will track
the satellite to its best ability and will not require manual
adjustment from the handset.
Marine Antenna Setting
FCN 9 1
To display the current
setting. This display shows the
setting of the antenna in an
abbreviated form where A=azimuth
plane and E=elevation plane. Both
readings are in degrees. The
display will also show the current plane which can be
controlled by the handset keys.
To adjust the antenna
+
or - are used to increment or decrement the antenna
setting in the plane being displayed. The changes in the
antenna alignment are displayed as the adjustments are
made.
To switch between azimuth and elevation plane control, use
the key. The arrows for editing control will change to
M
indicate the plane that is currently being edited.
An RSSI is displayed to monitor the effect of the adjustments.
This value updates every 2 seconds.
EXIT
CLR
(Hold) Return to previous screen.
Dome Antenna
The Antenna Adjust function for the Dome antenna is not
applicable since the antenna is self steering.
Manual Mast Antenna
The manual mast antenna is not adjusted using the handset
so FCN 91 is not applicable for this antenna.
FCN 91
12 A
EOOAOOO
162
FCN 91: ANTENNA ADJUST
6
Unknown Antenna
When the transceiver does not recognise the antenna, or
there is no antenna connected the display will show
"Unknown Antenna" .
CLR
(Hold) Return to previous screen.
163