Rcvds05 Used As Source Selector For A Barco Projector; Rcvds05 To Projector Communication Link; Signal Connection; Rcvds05 To Projector - Barco R9827880 Owner's Manual

INSTALLATION
B. RCVDS05 USED AS SOURCE SELECTOR FOR A BARCO
PROJECTOR.
B.1. RCVDS05 to PROJECTOR communication link.
Plug the male D9 connector of a communication cable into the female D9 connector
labelled "to projector" on the back plane of the RCVDS05.
Plug the female D9 connector of the other end of the communication cable into the
male connector labelled "com port (800 peripherals)" on the rear or front panel of the
projector (depending on the type of projector).
B.2. Signal connection.
B.2.1. RCVDS05 to PROJECTOR.
Connect the video output of the RCVDS05 to the video input of the projector using a
coaxial cable with BNC connectors.
Connect the S-Video output of the RCVDS05 to the S-Video input of the projector
using a 4-wire coaxial cable with 4 pin plugs.
Connect the Red, Green, Blue, H/S sync and V sync outputs of the RCVDS05 to the
Red, Green, Blue, H/S sync and V sync inputs of the projector using coaxial cable with
BNC connectors.
98 27920
R
To audio
amplifier
R5975765 RCVDS05 020997
98 27930 98 28020
TO PROJECTOR
L R L R
'
PDOH
To comm. port
(800 peripherals)
To Video
input
To RGBH
input
To S-Video
input
31