Barco R9827880 Owner's Manual page 19

INPUT MODULES
B.2. Input module : RGBS/RGsB analog.
Order number : 98 27910
RGBS/RGsB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if sync on green
Vert. sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. sync / Composite sync :
1 Vpp to 4 Vpp ± 3 dB
All input signals are always 75 ohm terminated,
even in the "not selected" mode.
The audio signal corresponding
to the source has to be connected
to the audio input just below the
RGBS analog input slot.
Straps on module level :
Floating or non-floating input.
Red : J3 : strap "yes" : non floating
Green : J4 : strap "yes" : non floating
Blue : J5 : strap "yes" : non floating
H/C : J6 : strap "yes" : non floating
V : J7 : strap "yes" : non floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : see drawing
Factory preset : separate sync.
R5975765 RCVDS05 020997
Green
Horizontal or composite
Vertical sync
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
Red
Blue
sync
98 27910
19