Optional Remote Ir Receiver To Rcvds05 - Barco R9827880 Owner's Manual

INSTALLATION
98 27920
R L
98 27920
R L
C.3. Optional Remote IR receiver to RCVDS05.
The RCVDS05 must be equipped with a communication interface module to connect
the optional Remote IR receiver to the RCVDS05. The switch on the communication
interface module has to be set in the position "BARCO".
The RCVDS05 may be controlled from a remote location via the optional remote IR
receiver. This allows the RCVDS05 to be installed in a separate location from the
control room. The selected source number is displayed by the remote IR receiver.
R5975765 RCVDS05 020997
RCVDS - 1
98 28000
98 28020
TO PROJECTOR
R L R
98 28020
98 27930
TO PROJECTOR
R L R
'
PDOH
Mode switch in
"BARCO" mode
'
I
98 28010
RCVDS - 2
37