B.5. Input module : RGBS/RGsB analog for Line Doubling*
Order number : R9828410
RGBS/RGsB analog : 4 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if sync on green
Comp. Sync : 0.3 Vpp to 4 Vpp ± 3 dB
Polarity of the input signals
R, G and B signal: positive signal
Sync Signals: negative Composite signal
All input signals are always 75 ohm terminated,
even in the "not selected" mode.
The audio signal corresponding to the source has
to be connected to the audio input just below the
INPUT FOR LIDO slot.
Strap on module level:
Insertion or non of a strap on the module determines the following Sync mode:
No strap = Automatic detection of Separate or Sync on Green.
Strap in position RGBS: separate Sync.
Strap in the position RGsB: Sync. on Green.
*Line Doubling if RCVDS05 is equipped with a line Doubler unit
24
RGBS
1 2 1 2
1 2 1 2
RGsB
1 2
1 2 1 2
1 2
INPUT MODULES
Red
Green/Gs
Blue
Composite Sync
R5975765 RCVDS05 020997