Input Module : Rgb3S/Rg3Sb Analog; B.2. Input Module : Rgbs/Rgsb Analog - Barco R9827880 Owner's Manual

INPUT MODULES
B.3. Input module : RGB3S/RG3sB analog.
Order number : 98 27920
RGB3S/RG3sB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if Tri-level sync on green
Vert. Tri-level sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. Tri-level sync / Composite Tri-level sync:
All input signals are always 75 ohm
terminated, even in the "not selected"
mode.
The corresponding audio signal for
this source has to be connected to
the audio input just below the RGB3S
analog input slot.
Straps on module level :( see photo on page 20 'B.2. Input module : RGBS/RGsB
analog ')
Floating or non-floating input.
Red : J3 : strap "yes" : non floating
Green : J4 : strap "yes" : non floating
Blue : J5 : strap "yes" : non floating
H/C : J6 : strap "yes" : non floating
V : J7 : strap "yes" : non floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : separate sync or sync on green.
Factory preset : separate sync.
R5975765 RCVDS05 020997
1 Vpp to 4 Vpp ± 3 dB
Green
Horizontal or composite
3 level sync
Vertical 3 level sync
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
Red
Blue
98 27920
21