A-1-3 Lcd Screen Works Fine In Windows But Acted Funny When Running Certain Programs Or Games; A-1-4 The Display Is Not On The Lcd Center; A-2 Keyboard And Pointing Device Not Responding - Advantech PWS-1419 User Manual

PWS-1409/1419 User's Manual
A-1-3 LCD SCREEN works fine in Windows but acted funny when running certain
programs or games:
The built-in Intelligent Analog-Digital conversion board (AD board) should adjust the screen to
the proper resolution to fill the entire display. However, certain programs or display modes
might cause the AD board to not align or sync properly. Check if the program that you are
running is running under supported resolution. (The max resolution on 12.1" is 800 * 600, 13.
1", 14.1", 15" is 1024 *768. and the vertical frequency should be between 60Hz and 70Hz)
You can also try adjusting the OSD to manually adjust the resolution (see Section 6 on Using
The Systems Controls).

A-1-4 The display is not on the LCD center

(The max resolu-
Adjust the OSD to manually adjust the resolution. Check the VGA output.
tion on 12.1" is 800 * 600, 13.1", 14.1", 15" is 1024 *768. and the vertical frequency
should be between 60Hz and 70Hz)

A-2 Keyboard and pointing device not responding

Remove both the PS-2 connections on the motherboard and try using an external regular
keyboard and mouse. If an external keyboard or pointing device is working properly then you
have a bad keyboard or keyboard cable assembly.
There will be 1 Y-type extension cable come wit your SBC, The one-connector end connect to
the SBC, and there are 2 connectors for the other end, one is for the keyboard, the other for
the touch pad. Make sure that you connect to the right connector.
47