3-8 Intall the driver cage to case
Step 1.
Carefully put the drive cage back into the chassis.
Step 2. Plugging the case fan power conecttor into the interface board for fan power
Step 3.
Plugging the power conector for floppy disk and hard disk
Step 4. Align the mounting holes and insert the screws # 2
connect the case fan power connect
(black arrow) to the interface board
(white arrow)
PWS-1409/1419 User's Manual
36
CONNECT THE DRIVE POWER CONNECTOR
Align the mounting holes and insert the
screws # 2