Removing The Card Stabilizers; Identifying The Internal Parts - Advantech PWS-1419 User Manual

Chapter 2 PWS-1409T Construction
2-1 Open the chassis
2-1-1 Removing the Back Cover
Face the back of the chassis. Remove all
screws as shown. There are 10 screws along
the perimeter of the back cover that holds the
back cover to the chassis.
Always power-down the system.
Always turn off any peripheral devices connected to the system.
Always unplug the AC power cord from the chassis.
Face the back of the chassis. Remove all the release screws as shown. There
are 10 screws along the perimeter of the back cover that secures it to the
chassis.

2-2 Removing the Card Stabilizers

The stabilizer is designed to securely hold
down add-on cards in their expansion slots
with plastic hold-down clips. The stabilizer
must be remov ed prior to adding boards and
components in the chassis.
Step 1. Remove the card stabilizer release
screws as shown.
Step 2. Remove the stabilizer and set them
aside.

2-3 Identifying the Internal Parts

4
2
1
5
PWS-1409/1419 User's Manual
3
17
1. Power supply
2. Slim CD ROM drive holder (2pcs)
3. Slim Floppy drive holder
4. Internal Cooling fan
5. LCD power connector (to power
supply)