Connecting The Power Connector; Installing The Slim Cd Rom To The Cd Rom Cage - Advantech PWS-1419 User Manual

2-7 Connecting the power Connector

The plug from the power supply will only insert in one orientation. Push down firmly making
sure the hook on the terminal block clips onto the plug.
Connecting the Chassis Cables
The chassis has 3 internal cooling fan to reduce the temperature of the system, connecting the
fan power connector to fan adapter board.
The flat panel display receives its power from
the power supply. Find the wire bundle that
ends in a 4-pin power connector from the chas-
sis side and plug it into one of the power supply
connectors.

2-8 Installing the slim CD ROM to the CD ROM Cage

Step 1. Take back the CD ROM cage, take the #10 screw from your package, and secure the
CD ROM to CD ROM cage
Step 2. Take the CD ROM interface board and Screw #1 from your package, and fix the
interface board to CD ROM
Step 3. Connect the cables to CD ROM interface board
Interior space is going to be tightened. While you have the CD ROM cage outs ide of
the chassis, plug in all the cables.
Power supply plugs and audio cable will only insert in one orientation. Ribbon cables
should always be connected with the colored stripe to Pin 1 on the connectors.
PWS-1409/1419 User's Manual
20