Installing The Backplane; Installing The Standoffs - Advantech PWS-1419 User Manual

1
2
2
2
5 6

3-5 Installing The Backplane

Make sure that at no time you are working on any electrical or electronic components while any
part of the system is energized. Always disc onnect the power! Use caution to protect the
delic ate elec tronic components. Ground your self during the installation of the motherboard
and other c omponents.

3-5-1 Installing the Standoffs

Take a moment to study the inside of the chassis, making note of the location of the keyboard
Connector if it come with backplane.
Step 1. Slant the backplane retention into the chassis and position it in the area it will be
installed, making sure the alignment of the slots and connectors is correct.
Step 2. Make sure the location of the backplane mounting points. You are going to install
standoffs at those mounting points.
PWS-1409/1419 User's Manual
3
4
8
7
32
13 1
9
10 11
#9 Standoffs
#2 3x4 screws to tighten backplane
#4 Washer between the backplane and screws
1. speaker
2 case fan
3 fan board
4 LCD power
cable
5 audio cable
CD audio in
6 driver cage
7 fan cable
to SBC
8 CDROM
signal cable
9 power supply
10 reset cable
11 audio cable
(SBC to speaker)
12 side door
13 mount hole
12