2-9 Installing the CD ROM Cage
Step 1.
Carefully put the drive cage back into the chassis. (fig1)
Step 2.
Align the side mounting holes. Insert the screw#6 and tighten it
Step 3.
Align the back mounting holes. Insert the screw#7 and tighten it
Step 4.
Us e the cable to tighten the signal cable (fig3)
Put the c age back to case carefully
2-10 Installing Drives in the Drive Cage
Take back the drive cage, take thefloppy interface
board, signal cable and screws from your package,
and secure the drives to driver cage
PWS-1409/1419 User's Manual
22
Insert the screw to fix the CD ROM cage
Tighten the signal cable