Adjusting The Osd Parameters; Changing Filter For The Internal Fan; Pws1419 - Advantech PWS-1419 User Manual

4-2-1 Adjusting the OSD Parameters

The OSD consists of a main menu and sub-menus with the following selections:
Brightness MENU
Manual adjustment the brightness
CONTRAST MENU
Contrast: Manual adjustment the contrast
Sub-CONTRAST: Manual adjustment of individual RGB channel contrast.
Position MENU
H-size: Adjust the horizontal size
Clock phase: Manual adjustment of the sample pixel clock phase.
H.POSITION: Adjusts the horizontal image position within the display area of the LCD.
V.POSITION: Adjusts the vertical image position within the display area of the LCD.
Information
Show the current display resolution, vertical and horizontal frequency

4-3 Changing Filter for the internal Fan

4-3-1 PWS1419

The internal fan is the entrance of the system air flow. It may contain dust during the
long use. Change or clean the filter for the fan will improve the system air flow. Please
follow the steps to clean or change the filter.
Step 1. The filter is under a metal cage on the right side of case.
Step 2. Take off the two screws
Step 3. Remove the cage
Step 4. Remove the filter
Step 5. Replace a new one or you may clean the original one
Step 6. Move back the cage, and insert back the screws
PWS-1409/1419 User's Manual
Menu
Sel
+
-
Reset
ATX Power
43
Menu
Sel
+
-