B-4-1 Adjusting The Osd Parameters - Advantech PWS-1419 User Manual

Brightness
Contrast
Position
Information
All Reset
Follow these steps to activate the on-screen display and make any adjustments to suit
your preference:
Step 1. Power up the system.
Step 2. Press MENU
Step 3. Press SEL to step through the main options.
Step 4. Press either + or – button to bring up sub-menus of the highlighted
option.
Step 5. Press SEL to step through the sub-menu options.
Step 6. Press either + or – to modify the selected parameter value. Pressing a button once
increases or decreases the numerical value by a single digit.
Holding down a button increases the rate of change. Press MENU to the previous screen.
Step 7. After you've made your adjustments press MENU repeatedly until the OSD is turned
off.

B-4-1 Adjusting the OSD Parameters

The OSD consists of a main menu and sub-menus with the following selections:
8-4-1-a BRIGHTNESS MENU
Adjusts the black level.
8-4-1-b CONTRAST MENU
Contrast: Adjusts the contrast.
SUB: Manual adjustment of individual RGB channel contrast.
PWS-1409/1419 User's Manual
Brightness
H. Size
Clock Phase
H. Position
V. Position
to step through the main options.
51
Contrast
Sub. Contrast
R
G
B
Information
1024 x 768
H. f 56.4KHz
V. f. 70 Hz