Installing The Drive Cage Into The Case - Advantech PWS-1419 User Manual

Step10. Connect the signal cable
Step11. Connect the power cable

2-13 Installing the Drive cage into the case

Step 1. Connec t the hard drive signal cable and power cable
Interior space is going to be tightened. While you have the drive cage outside
the chassis, plug in hard drive signal and power cable
Power supply plugs cable will only insert in one orientation. Ribbon cables should
always be connected with the colored stripe to Pin 1 on the connectors for the signal
cable.
Step 2. Carefully put the drive cage back into
the chassis.
Step 3. Align the back and bottom mounting holes.it
PWS-1409/1419 User's Manual
25
1. Lay the chassis on your work area so that
you have access to the bottom side.
2. Insert the screw #6 into the points