Advertisement
DTC5500LMX Card Printer Cleaning Kit Instruction, PLT-02707, Rev. 1.1
1
Safety Messages (review carefully)
Symbol
Danger:
ESD:
Caution:
March 2016
Critical Instructions for Safety Purposes
Failure to follow these installation guidelines can result in death or serious
injury.
Information that raises potential safety issues is indicated by a warning symbol
(as shown to the left).
•
To prevent personal injury, refer to the following safety messages
before performing an operation preceded by this symbol.
•
To prevent personal injury, always remove the power cord prior to
performing repair procedures, unless otherwise specified.
•
To prevent personal injury, make sure only qualified personnel perform
these procedures.
This device is electrostatically sensitive. It may be damaged if exposed to
static electricity discharges.
Information that raises potential electrostatic safety issues is indicated by a
warning symbol (as shown to the left).
•
To prevent equipment or media damage, refer to the following safety
messages before performing an operation preceded by this symbol.
To prevent equipment or media damage, observe all established
•
Electrostatic Discharge (ESD) procedures while handling cables in or
near the Circuit Board and Printhead Assemblies.
•
To prevent equipment or media damage, always wear an appropriate
personal grounding device (e.g., a high quality wrist strap grounded to
avoid potential damage).
•
To prevent equipment or media damage, always remove the Ribbon
and Cards from the Printer before making any repairs, unless otherwise
specified.
•
To prevent equipment or media damage, take jewelry off of fingers and
hands, as well as thoroughly clean hands to remove oil and debris before
working on the Printer.
This symbol signifies electrical danger which may cause injury or death.
Page 4 of 16
Advertisement
