Safety Messages - United States - HID FARGO DTC ii Plus User Manual

Powering
Trusted Identities
1.3 Safety messages

1.3.1 Safety messages - United States

Symbol Critical instructions for safety purposes
Danger: Failure to follow these guidelines results in personal injury or death. To prevent
personal injury or death:
ESD: This device is electrostatically sensitive. You may damage the device if exposing it to static electricity discharges.
To prevent damage:
Caution: This symbol warns of an electrical hazard that could result in personal injury or death.
Caution: For safety purposes, do not use Ethernet for a direct connection outside of the building.
PLT-05151, A.0.R
Reference the following safety messages before performing an operation.
◼
Always remove the power cord prior to performing repair procedures, unless otherwise specified.
◼
Ensure only qualified personnel perform these procedures.
◼
Reference the following safety messages before performing an operation.
◼
Observe all established Electrostatic Discharge (ESD) procedures while handling cables in or near the circuit
◼
board and printhead assemblies.
Always wear an appropriate personal grounding device.
◼
Always remove the ribbon and cards from the printer before making any repairs, unless otherwise
◼
specified.
Remove jewelry and thoroughly clean hands before working on the printer.
◼
12
FARGO® DTC®ii Plus
User Guide
August 2020