Alarm Settings - Honeywell HUS-NVR-1032/6032-E User Manual

Multicast
To set a channel to multicast stream, click "Multicast" and the below window is displayed:
Figure 5-91 Multicast
In the above window, you can enable multicast, set the beginning IP address, etc.
Email
Click the tab of "Email" and the following window is displayed. Open/Close Email reminder
and make relative settings in this window. After that, click Test and the testing result will be
shown on the right.
Figure 5-92 Email

Alarm Settings

Click Alarm Settings in
are 3 options: "System Alarm", "Alarm Output" and "Alarm Input" as shown in the following
figure:
Figure 5-68 to enter the Alarm Settings screen and where there
75