Recording Settings; Figure 3-45 Record Menu; Figure 3-46 Record Setup Screen - Honeywell HRSD16 User Manual

Configuration
2.
3.
4.
Save your Remote Control settings by highlighting Save and pressing
Cancel to exit the screen without saving the changes.

Recording Settings

Your DVR offers a variety of flexible recording modes. You can set it to:
•
•
•
•
Record Screen
Highlight Record in the Record menu and press
appears.
Document 800-00918 Rev F
02/08
Highlight the field beside Port and select from None, RS-232C, and RS485. If the
RS-232C port and RS485 port are in use for PTZ control, networking, or text input,
the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop
Bits for the device you are connecting to the DVR.
Highlight the field beside Remote Control Product and select the device from the
list.
record all the time
record only events
continue recording once the hard disk drive is full by recording over the oldest
video
stop recording and alert you when the hard disk is full
Figure 3-45 Record Menu
Figure 3-46 Record Setup Screen
. The Record setup screen
. Select
71