Graphics Accelerator Driver - NEC Express5800/R120b-1 User Manual

Installing the Operating System with Express Setup 5-27
LAN Board Driver (N8104-121/122/125A/126)
The drivers for LAN Board Driver (N8104-121/122/125A/126) are automatically installed by
Windows Plug-and-Play. You do not need to install them manually.

Graphics Accelerator Driver

If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD-ROM attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Refer to "Graphics Accelerator Driver" described in Appendix D when you want to reinstall the
driver individually.
Installing SCSI Controller Driver (N8103-75/107)
If you use the SCSI Controller N8103-75/107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver (N8103-104A)
If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing Fibre Channel Controller Driver (N8190-127/131/153/154)
If you use the Fibre Channel Controller N8190-127/131/153/154, you do not need to install the
driver manually. It is automatically installed by Windows Plug-and-Play.