NEC Express5800/R120b-1 User Manual page 491

14.
The folder reference dialog box appears.
Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK].
If the N8103-129/130 RAID Controller is used:
– Windows Server 2008 32-bit (x86) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008\fd1\megasas2
– Windows Server 2008 64-bit (x64) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008x64\fd1\megasas2
If Onboard RAID controller (LSI Embedded MegaRAID
environment with which the USB DVD drive is connected:
– Windows Server 2008 32-bit(x86) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008\fd1\megasr1
– Windows Server 2008 64-bit(x64) Edition
<drive letter>:\017\win\winnt\oemfd\ws2008x64\fd1\megasr1
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 15.
If the N8103-129/130 RAID Controller is used:
[LSI MegaRAID SAS 9264-8i]
If Onboard RAID controller (LSI Embedded MegaRAID
environment with which the USB DVD drive is connected:
[LSI Embedded MegaRAID]
NOTE:
When the onboard RAID controller (LSI Embedded
MegaRAID
work here is unnecessary.
15.
Remove the NEC EXPRESSBUILDER DVD and set Backup DVD-ROM or Windows
Server 2008 DVD-ROM.
16.
Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT:
step 19.
17.
Click [New], enter a partition size, and then click [Apply].
18.
Select the partition created in step 17, and then click [Format].
19.
Select the partition created, and then click [Next].
TM
) is used in environment with built-in DVD drive, the
If the partition has already been created, go to
Installing Windows Server 2008 E-15
TM
) is used in the
TM
) is used in the