NEC Express5800/R120b-1 User Manual page 436

9-80 Upgrading Your Server
3.5-inch Disk Model
1.
See page 9-4 to prepare.
2.
Pull out the server from the rack (as described on page 9-4).
3.
Remove the top cover (as described on page 9-24).
4.
Remove the cable while holding both ends of cable fixing bracket.
5.
Remove the screw from the optical disk drive bracket, and then remove the optical disk
drive bracket.
Move the bracket to the left, viewed from the front of server.
6.
Remove the optical disk drive by sliding it to the direction shown by the arrow mark in
the figure below.
Cable fixing bracket
Screw
Optical disk drive bracket
<2>
<1>