NEC Express5800/R120b-1 User Manual page 368

9-12 Upgrading Your Server
NOTE:
inserted the hard disk drive.
9.
Power on the server, and run the SETUP utility.
Select the [Boot] menu (described on page 4-33) to set the boot priority. When you install
an additional hard disk drive, the boot priority stored in BIOS is cleared.
10.
Install the front bezel you removed in step 2.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame,
install the front bezel, and lock it with the security key.
3.5-inch hard disk drive
1.
See page 9-4 to prepare.
2.
Unlock the front bezel with the security key and remove the front bezel.
3.
Locate the slot in which you are going to install a hard disk drive.
The server has three slots. Install the hard disk drives from the left vacant slot.
4.
Remove the dummy tray.
There are dummy trays in all hard disk drive bays.
IMPORTANT:
Keep the dummy tray for future use.
The purpose of a dummy tray is to increase the cooling effect in the server. Install
a dummy tray in slots not containing a hard disk drive.
Confirm that the handle is hooked to the frame when having