NEC Express5800/R120b-1 User Manual page 203

LAN Driver Setting
Link Speed
LAN drivers will be installed automatically, but the link speed and Duplex mode need to be
specified manually.
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system.
WOL
Refer to the following procedure for WOL(Wake On LAN) setting.
1.
Start Device Manager.
2.
Point to [Network adapters] and double click following adapter.
Open the adapter [Properties].
[Intel(R) 82576 Gigabit Dual Port Server Network Connection]
[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Wake On Directed Packet"
"Wake On Magic Packet"
"Wake on Magic Packet from power off state"
"Wake on Link"
Installing the Operating System with Express Setup 5-53
Using WOL Not using WOL
ON or OFF OFF
ON OFF
ON OFF
OFF OFF