NEC Express5800/R120b-1 User Manual page 487

5.
Click the [Install now
The installation starts.
– If the following message is displayed:
Go to Step 6.
– If the following message is not displayed:
Go to Step 9.
NOTE:
When the onboard RAID controller (LSI Embedded
MegaRAID
following messages are displayed. Please use "OEM-Disk" made by
"Creating Windows Server 2008 OEM-Disk for EXPRESSBUILDER".
Load Driver
A required CD/DVD drive device driver is missing. If
you have a driver for floppy disk, CD, DVD, or USB flash
drive, please insert it now.
Note; If the Windows installation media is in the
CD/DVD drive, you can safely remove it for this step.
6.
Insert the "OEM-Disk" into the USB floppy disk drive, and press [Browse].
IMPORTANT:
connect the Flash FDD.
] button.
TM
) is used in environment with built-in DVD drive, the
[Browse] [OK]
If you have created "OEM-Disk" into the Flash FDD,
Installing Windows Server 2008 E-11
[Cancel]