NEC Express5800/R120b-1 User Manual page 220

5-70 Installing the Operating System with Express Setup
10.
Specify the installing medium and the Windows system partition.
[Specify medium / Partition] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].
IMPORTANT:
If you install Windows Server 2003 R2 and Service Pack, apply
Windows Server 2003 R2 DISC 2 after Express Setup completion,
and then install Service Pack by "Updating the system".
About partition size
– Specify the partition size larger than required minimum size for
– Do not specify larger partition size than the capacity of
– You can not specify a logical drive larger than 2,097,144MB at
If you select "Create a new partition" at "Windows system drive
settings", the contents of the hard disk will be all deleted.
If "Use existing partitions" is selected, EXPRESSBUILDER installs
the Operating System to the 1st partition (1st partition is deleted).
The data in the other partition is kept if the system has two or more
partitions. (See the figure below.)
You cannot re-install the system with the existing partition that is
upgraded to Dynamic Disk remained. Do not select "Use existing
partitions" at "Windows system drive settings".
OS installation.
connected hard disk drive.
RAID system.
First
Partition
Deleted
Second Third
Partition Partition
Retained Retained