Table of Contents
Advertisement
2.
While pushing the unlock button on the front of the server, hold the rails and slowly move
them toward the rear of the server.
3.
After a while, the rails are locked with clicking sound. Pull the release levers on the left
and right sides of the server toward direction indicated by an arrow (white) in the figure,
and remove them from the server while unlocking it.
Pull the release lever toward the
direction shown by the arrow
(white) to remove the rail.
4.
Only the inner rails remain screwed to the server when the rail assemblies have been
removed.
Press this button to
unlock the server.
Inner rail
Setting Up Your Server 3-7
Advertisement
Table of Contents
Troubleshooting
