Table of Contents
Advertisement
Option
DHCP
Web Interface
HTTP
HTTP Port
Number
HTTPS
HTTPS Port
Number
Command Line
Interface
Telnet
Telnet Port
Number
SSH
SSH Port Number
Clear BMC
Configuration
Parameters
Disabled
Enabled
–
Disabled
Enabled
[80]
Disabled
Enabled
[443]
–
Disabled
Enabled
[23]
Disabled
Enabled
[22]
[No]
Yes
Configuring Your Server 4-29
Description
Set to [Enabled] to obtain an IP address from
the DHCP server automatically. If you intend to
specify an IP address manually, set to
[Disabled].
Set to [Enabled] to use HTTP communication
for the Web interface.
Specify the TCP port number which the
management LAN uses for HTTP
communication.
Set to [Enabled] to use HTTPS communication
for the Web interface.
Specify the TCP port number that the
management LAN uses for HTTPS
communication.
Set to [Enabled] to use Telnet communication
as a command line interface.
Specify the TCP port number to be used for
Telnet communication.
Set to [Enabled] to use SSH communication as
a command line interface.
Specify the TCP port number to be used for
SSH communication.
Press Enter and select "Yes" to initialize the
BMC configuration.
–
–
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
