Recovery For Windows System - NEC Express5800/R120b-1 User Manual

RECOVERY FOR Windows SYSTEM

If any file necessary for running the OS is damaged, use the following procedures to recover the
system.
IMPORTANT:
After recovering the system, see "Updating the System" in Chapter
5 and be sure to update the system.
Also, you need to update all the drivers after the system update. For
more information, see "Installing and Setting Device Drivers" in
Chapter 5.
If the hard disk drive can not be recognized, you can not recover the
system.
For Windows Server 2008 R2
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2008
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2003 x64 Editions
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2003
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
Troubleshooting 8-51