Table of Contents
Advertisement
LAN Driver Setting
Link Speed
LAN drivers will be installed automatically, but the link speed and Duplex mode need to be
specified manually.
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4.
Click [OK].
5.
Restart the system.
WOL
Refer to the following procedure for WOL(Wake On LAN) setting.
1.
Start Device Manager.
2.
Point to [Network adapters] and double click following adapter.
Open the adapter [Properties].
[Intel(R) 82576 Gigabit Dual Port Server Network Connection]
[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item
"Wake On Magic Packet"
"Wake on Magic Packet from power off state"
"Wake on Link"
"Wake on Pattern Match"
NOTES:
[Power Saver Options] setting is not necessary to change.
Above setting will be maintained until manually resetting are
executed.
4.
Click [OK].
5.
Restart the system.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if the
network ports are not available for WOL.
Installing the Operating System with Express Setup 5-23
Using WOL
Not using WOL
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
Advertisement
Table of Contents
Troubleshooting
