Table of Contents
Advertisement
9-52 Upgrading Your Server
IMPORTANT:
Do not touch the terminals of the riser cards and PCI cards with your bare hand.
Fingerprints and dust left on them cause the server to malfunction.
If you are unable to install a PCI card correctly, remove it, and then install it again.
Be careful not to apply excess force to a PCI card or riser card. Doing so may
damage the card.
NOTES:
Confirm that the end of the PCI card bracket is inserted in the frame slot of the
riser card.
Some PCI cards have terminal section that extends over the mating connector.
8.
Secure the PCI card with the screw you removed in step 5.
IMPORTANT:
from dust or fingerprints. Dust and fingerprints left on them cause the
server to malfunction.
Low-profile riser card
This step is to protect the terminals of the riser card
Full-height riser card
Advertisement
Table of Contents
Troubleshooting
