Table of Contents
Advertisement
3.2.3 Transformer Assembly
1. Remove the upper cover
2. Detach the transformer connector (1) from the control board (2).
3. Remove the ground strap mounting screw (3).
4. Remove the two transformer mounting screws (4).
5. Remove the transformer assembly (5) along with the power supply board (6) and AC receptacle (7) by
lifting.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML172/ML182 Series
(3.2.1
).
Chapter 3 Printer Maintenance
Page: 28
Advertisement
Table of Contents
