SECTION 5
BACK HEIGHT ADJUSTMENT
(ADJUSTABLE BACKS ONLY) (FIGURE 4)
1. Remove the back upholstery from the handcycle. Refer to BACK UPHOLSTERY
REPLACEMENT in SECTION 7 of this manual.
Push pin MUST protrude through hole in back cane.
Ensure that both back cane inserts are at the same height BEFORE
reassembling the chair.
2. Press the push pin on the back cane insert tube in and adjust the back height to one
(1) of three (3) heights depending on original back height.
3. Reinstall the back upholstery onto the handcycle. Refer to BACK UPHOLSTERY
REPLACEMENT in SECTION 7 of this manual.
FIGURE 4 - BACK HEIGHT ADJUSTMENT (ADJUSTABLE BACKS ONLY)
Excelerator™Series
WARNING
Push Pin
26
RIDING POSITION
Back Canes
Back Cane Insert
Part No. 1056188