Status Messages Screen - Cisco 7940G Administration Manual

Viewing Status, Statistics, and Firmware
Information on the Cisco Unified IP Phone
This chapter describes how to access and use the following screens on the Cisco Unified IP Phone:
•
•
•
You access these screens from the Status menu on the phone.
You can use the information on these screens to monitor the operation of a phone and to assist with
troubleshooting
For more information about troubleshooting, see

Status Messages Screen

You can access the Status Messages screen at any time, even if the phone has not finished starting up.
Table 6-1
to address errors that are indicated.
To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Select Status.
Step 2
Select Status Messages.
Step 3
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Status Messages Screen, page
Network Statistics Screen, page
performance
Firmware Versions Screen, page
the phone
describes the status messages that might appear. This table also includes actions you can take
C H A P T E R
6-1—Displays important system messages
6-5—Displays information about the phone and network
6-6—displays information about the firmware that is running on
Chapter 7, "Troubleshooting and Maintenance."
6
6-1