Configuring Startup Network Settings; Configuring Security On The Cisco Unified Ip Phone - Cisco 7940G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Configuring Startup Network Settings

If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
•
•
•
•
•
•
Collect this information and see

Configuring Security on the Cisco Unified IP Phone

The security features protects against several threats, including threats to the identity of the phone and
to data. These features establish and maintain authenticated and encrypted communication streams
between the phone and the Cisco Unified Communications Manager server, digitally sign files before
they are delivered, and provide other security functionality.
For more information about the security features, see the
Unified IP Phones" section on page
Guide.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
IP address
IP subnet mask
Default gateway IP address
Domain name
DNS server IP address
TFTP server IP address
Chapter 4, "Configuring Settings on the Cisco Unified IP Phone."
"Understanding Security Features for Cisco
1-7. Also, refer to Cisco Unified Communications Manager Security
Configuring Startup Network Settings
3-9