Cisco Unified Communications Manager Options - Cisco 7940G Administration Manual

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
HTTP Proxy Not applicable in a Cisco Unified Communications
Addr Manager environment.
HTTP Proxy Port Not applicable in a Cisco Unified Communications
Manager environment.
GARP Enabled Indicates whether the phone learns MAC addresses from
Gratuitous Address Resolution Protocol (ARP) responses.
Disabling the phone's ability to accept Gratuitous ARP will
prevent applications that use this mechanism to monitor and
record voice streams from working. If voice monitoring is
not desired, set this option to No (disabled).

Cisco Unified Communications Manager Options

The Call Manager 1 through Call Manager 5 options on the Network configuration menu show the host
names or IP addresses, in prioritized order, of the Cisco Unified Communications Manager servers that
the phone can register to. An option can also show the IP address of an SRST router that is capable of
providing limited Cisco Unified Communications Manager functionality, if such a router is available.
For an available Cisco Unified Communications Manager server, an option on the CallManager
Configuration menu will show the Cisco Unified Communications Manager server IP address or name
and one of the states shown in
Table 4-3
State
Active
Standby
Blank
An option may also display one of more of the designations or icons shown in
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
4-8
Table 4-3.
Cisco Unified Communications Manager Server States
Description
Cisco Unified Communications Manager server from which the phone is
currently receiving call-processing services
Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable
No current connection to this Cisco Unified Communications Manager
server
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
—
—
From Cisco Unified Communications
Manager, choose Device > Phone > Phone
Configuration.
Table 4-4:
OL-15499-01