Sip Configuration Menu - Cisco 7940G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-5 SIP Configuration Menu Options (continued)
Option Description
Start Media Port Displays the start Real-Time Transport Protocol (RTP)
range for media.
End Media Port Displays the end Real-Time Transport Protocol (RTP)
range for media.
Backup Proxy Not applicable in a Cisco Unified Communications
Manager environment.
Backup Proxy Port Not applicable in a Cisco Unified Communications
Manager environment.
Emergency Proxy Not applicable in a Cisco Unified Communications
Manager environment.
Emergency Proxy Port Not applicable in a Cisco Unified Communications
Manager environment.
Outbound Proxy Not applicable in a Cisco Unified Communications
Manager environment.
Outbound Proxy Port Not applicable in a Cisco Unified Communications
Manager environment.
NAT Enabled Displays if Network Address Translation (NAT) is enabled.
NAT Address Displays the WAN IP address of the NAT or firewall server.
Call Statistics Displays if call statistics are enabled on the phone.
Line Configuration Menu
The Line Configuration menu displays information that relate to the configurable parameters for the
lines in your phone. To access this menu, choose the appropriate Line x Settings option from the SIP
Configuration menu. For more information, see the
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
To Change
Scroll to the Start Media Port
1.
option, press the Edit softkey, and
then enter the desired value.
2. Press the Accept softkey.
Press the Save softkey.
3.
Scroll to the End Media Port
1.
option, press the Edit softkey, and
then enter the desired value.
2. Press the Accept softkey.
Press the Save softkey.
3.
—
—
—
—
—
—
Scroll to the NAT Enabled option
1.
and then press the Yes or the No
softkey to change the setting.
Press the Save softkey.
2.
Scroll to the NAT Address option,
1.
press the Edit softkey, and then
enter the desired IP Address.
Press the Accept softkey.
2.
Press the Save softkey.
3.
Scroll to the Call Statistics option
1.
and then press the Yes or the No
softkey to change the setting.
Press the Save softkey.
2.
"SIP Configuration Menu" section on page

SIP Configuration Menu

4-9.
4-11