Network Configuration Menu - Cisco 7940G Administration Manual

Network Configuration Menu

Table 4-2 Network Configuration Menu Options (continued)
Option Description
IP Address Internet Protocol (IP) address of the phone.
If you assign an IP address with this option, you must also
assign a subnet mask and default router. See the Subnet
Mask and Default Router options in this table.
Subnet Mask Subnet mask used by the phone.
TFTP Server Primary Trivial File Transfer Protocol (TFTP) server used
by the phone. By default this server is CiscoCM1. If you are
not using DHCP in your network and you want to change
this server, you must use this option.
If you set the Alternate TFTP option to yes, you must enter
a non-zero value for the TFTP Server 1 option.
If the primary TFTP server is not listed in the CTL file on
the phone, you must unlock the CTL file before you can save
changes to the TFTP Server 1 option. In this case, the phone
will delete the CTL file when you save changes to the
TFTP Server option.
For information about the CTL file, refer to Cisco Unified
Communications Manager Security Guide.
Dynamic TFTP Dynamic TFTP server used by the phone.
Server
Default Router 1 Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5.)
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1 Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–5) used
DNS Server 2
by the phone.
DNS Server 3
DNS Server 4
DNS Server 5
Dynamic DNS Not applicable in a Cisco Unified Communications
Server 1 Manager environment.
Dynamic DNS
Server 2
Operational Auxiliary Virtual Local Area Network (VLAN) configured
VLAN Id on a Cisco Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this option
indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative
VLAN are configured, this option is blank.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
4-6
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
—
Display only—cannot configure.
OL-15499-01