Troubleshooting and Maintenance
This chapter provides information that can assist you in troubleshooting problems with your
Cisco Unified IP Phone or in your IP telephony network.
For additional troubleshooting information, refer to the Using the 79xx Status Information For
Troubleshooting tech note. This document is available to registered Cisco.com users at this URL:
http://www.cisco.com/warp/customer/788/AVVID/telecaster_trouble.html
If you need additional troubleshooting assistance, you can contact the Cisco TAC. The phone generates
detailed logs that can assist the Cisco TAC with troubleshooting and resolving problems.
This chapter includes these topics:
•
•
•
•
•
•
•
Resolving Startup Problems
After installing a Cisco Unified IP Phone into your network and adding it to
Cisco Unified Communications Manager, the phone should start up as described in the
Phone Startup Process" section on page
sections for troubleshooting information:
•
•
•
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Symptom: The Cisco Unified IP Phone Does Not Go Through its Normal Startup Process, page 7-2
Symptom: The Cisco Unified IP Phone Does Not Register with Cisco Unified Communications
Manager, page 7-2
Symptom: Cisco Unified IP Phone Unable to Obtain IP Address, page 7-6
C H A P T E R
3-8. If the phone does not start up properly, see the following
7
"Verifying the
7-1