TVLogic LVM-172W Operation Manual page 15

Menu Contents
[2] PICTURE (DVI Analog)
Brightness
- This item controls the degree of brightness between -128 ~ 127.
# Brightness can be adjusted by using the [BRIGHT] control knob(LVM-172W) or [DOWN/BRIGHT] button
(LVM-242W) on the front of the monitor.
Contrast
- This item controls the contrast ratio between -128 ~ 127.
# Contrast can be adjusted by using the [CONTRAST] control knob(LVM-172W) or [UP/CONTRAST]
button(LVM-242W) on the front of the monitor.
Image Position
- This item controls the position(H/V) of the image in DVI Analog mode.
Phase
- This item controls phase value.
# If phase is not set to correct value, image may display artifacts and out of focus.
Clocks/Line
- This item is adjust timing for signal sync.
# If signal sync is not set to correct value, image may display flickering and drop.
Auto Adjustment
- This item adjusts the input siganl automatically. Phase, Clocks/Line, and Image Position are also adjusted.
# if image doesn't display correctly after the Auto Adjustment, select it again for correct adjustment.
Auto Adjustment activates automatically, when input signal resolution changes.