Removing C-Card; C-Map Nt Information; Getting Quick Info - Standard Horizon CP150 Owner's Manual

Open the door (see in Figure 3.1), gently push the C-CARD into the slot; push the
C-CARD in as far as it will go, then close the door to hold fixed into the slot (as shown
in the following Figure 4.1.7.1a).
Figure 4.1.7.1a - Inserting/Removing C-CARD (II)

4.1.7.2 Removing C-CARD

Open the door and remove the C-CARD out of the slot (as shown in the previous Figure
4.1.7.1a).

4.2 C-MAP NT INFORMATION

Looking at the chart displayed on the screen, you will see a variety of objects and
symbols. Refer to the Handbook for their explanation.
The display can be customized for your personal preferences and needs (see Section
8 Map Setup, Land Settings, Marine Settings, Nav Aids Settings, Chart Settings, Other
Settings).

4.2.1 Getting Quick Info

Place the cursor on a cartographic object; an information window is opened on the
screen containing the main information and symbols identifying that object:
Figure 4.2.1 - Quick Info window
Page 30 GPS Chart 150