Using Serial And Usb Communications; Checking The Status Of Your Wireless Connection - Intermec CK3a User Manual

Chapter 2 — Connecting and Configuring the CK3

Using Serial and USB Communications

Checking the Status of Your Wireless Connection

36
2 Select Enable > Ethernet.
3 Configure these network parameters:
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
c Default router
4 If necessary, set these parameters:
Primary and secondary DNS servers
•
• Primary and secondary WINS servers
5 Make sure that your CK3 is communicating with the network and
that the network can see your CK3.
You can use these CK3 accessories to transmit data to and receive data
from another device through serial or USB communications:
• AD20 single dock
• AV10 vehicle dock
• AA24 USB adapter
AA21 RS-232 adapter
•
For more information about these accessories and how to order them,
see "Accessories" on page
After you configure your wireless settings, you can use iConnect to
check the status of your connection. You can also use iConnect to
configure the network settings and test the connection of your CK3
against the network.
To check the status of your wireless connection
1 Tap the iConnect icon (
screen.
90.
) in the lower right corner of the Today
CK3 Mobile Computer User's Manual