Using The Power Button; Configuring The Backlight Settings - Intermec CK3a User Manual

Chapter 1 — Using the Computer

Using the Power Button

Configuring the Backlight Settings

10
To enable Caps Lock
On the alphanumeric keypad, press B, then the B key. Press B
•
again to disable the Caps Lock.
On the numeric keypad, press C 1.
•
The Caps Lock LED lights up green to show that the CK3 is in the
Caps Lock mode.
To disable Caps Lock
• Press the color modifier key again.
When you press the Power (
suspend mode. In this lower power mode, the CK3 continues to
supply power to all memory, but turns off power to most hardware
such as the display. This power-saving feature is designed to prolong
battery life.
By default, the CK3 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
You can override the backlight settings by changing the power
management settings. For more information on configuring power
management, see the next section,
To configure the backlight
1 Tap Start > Settings > the System tab > the Backlight icon > the
Battery Power tab.
2 With Turn off backlight if device is not used for checked, select
the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).
You can also use Intermec Settings to configure the backlight
settings.
) button, you put the CK3 into
"Managing Power on the
CK3 Mobile Computer User's Manual
CK3.""