Advanced Operation
Commands
#set_udp_remote_ip
The #set_udp_remote_ip command sets the remote UDP IP address. The IP address
must be specified using dot-decimal notation. The default UDP remote IP address is
192.168.1.255. The matrix must be rebooted after executing this command. Use the
#show_udp_remote_ip
command to display the current remote UDP IP address.
Syntax
#set_udp_remote_ip param1
Parameters
UDP address
param1
Example
#set_udp_remote_ip 192.168.1.227
UDP REMOTE IP ADDRESS : 192.168.1.227
page | 86